Industrial Cleaning Equipment Buying Guides
Expert advice to help you choose the right commercial cleaning equipment.
Extended-Reach Dry Ice Blasting Guide
Use a longer hose when the machine needs to stay on a safe, accessible surface while the operator cleans elevated equipment, production lines or confined areas. Check air supply, pellet size and operator protection before use.
Industrial and commercial dry ice blasting
Extended Reach Dry Ice Blasting System
The system includes a 13 ft standard hose and a 26 ft extended hose for applications where moving the main machine repeatedly is impractical. It is intended for equipment, overhead structures, production areas and restricted-access locations where hose reach is part of the cleaning plan.
13 ft Standard Hose26 ft Extended HoseUp to 116 PSI Air InputUp to 141 CFM Air Flow
View Dry Ice Blasting Machines
20 kgDry-ice hopper capacity, approximately 44 lb
116 PSIMaximum adjustable air pressure
141 CFMMaximum compressed-air flow
≤ 3 mmCompatible dry-ice pellet size
Suitable For
Choose an extended-reach configuration when the work area is distant, elevated or difficult to access with the machine beside the operator.
- Large equipment: trucks, construction machinery, industrial tanks and fixed equipment.
- Elevated areas: factory ceilings, ventilation ducts, overhead structures and elevated moulds.
- Restricted access: maintenance aisles, machinery interiors, tight corners and areas with limited clearance.
- Production lines: cover longer sections while positioning the main machine at an accessible point.
Operating Requirements
- Dry-ice pellets and a correctly sized air compressor are required; confirm what is included with the selected system.
- Use dry-ice pellets no larger than 3 mm if that is the confirmed feed requirement.
- Provide ventilation and use the PPE, hearing protection and carbon-dioxide controls required for the work area.
- Secure the hose route and check couplings before starting the machine.
Technical Specifications
| Power / Frequency | 240 V / 50 Hz |
| Dry Ice Output | 0.3-0.6 kg/min, approximately 0.66-1.32 lb/min |
| Air Input Pressure | 87-116 PSI / 0.6-0.8 MPa, adjustable |
| Air Flow Rate | 71-141 CFM / 2-4 m³/min |
| Net Weight | 245 lb |
| Dimensions | 28 x 24 x 37 in |
| Required Compressor | At least 7.5 kW / 10 HP; air tank at least 150 gal, if confirmed by the product documentation |
When Should You Use an Extended Hose?
Use the standard hose when:
- The work surface is close to the machine.
- The operator can reposition the machine safely.
- Hose length and storage simplicity are priorities.
Use the extended hose when:
- The surface is elevated or separated from the machine location.
- Repeated machine movement would interrupt the work.
- The hose can be routed and secured without creating a trip or snag hazard.
Important: Confirm the current hose length, pellet size, air pressure, air-flow and compressor requirements on the product page before publishing or ordering. Dry ice blasting requires ventilation, hearing protection, eye protection and site-specific safety controls.
Pressure Washer Buying Guide
Compare working pressure, water flow, cleaning width, connection type and application before choosing a pressure washer or surface-cleaning attachment.
Commercial Pressure Washer
GAT12 Pressure Washer
The GAT12 provides a 150 Bar working-pressure rating, 12 L/min water flow and a 2.5 kW motor for vehicle, equipment, workshop and hard-surface cleaning. Match the washer output to the pressure and flow requirements of the attachment you plan to use.
150 Bar Working Pressure
12 L/min Water Flow
2.5 kW Motor
View GAT12 Pressure Washer
150 BarWorking pressure, approximately 2,200 PSI
12 L/minWater flow rate
1,450 RPMMotor speed
2.5 kWPower rating
Typical Applications
Use the GAT12 where consistent pressure and a compatible accessory are needed for regular cleaning work.
- Vehicle and fleet washing: use with a suitable foam cannon, spray gun or surface cleaner.
- Workshops and equipment: remove mud, grease and general dirt from compatible hard surfaces.
- Concrete and loading areas: pair with a surface cleaner for more even coverage than a single spray nozzle.
Before You Buy
- Confirm the pressure washer pressure and flow match the attachment requirements.
- Check the electrical supply, inlet water supply and hose connection.
- Follow the surface, detergent and personal-protective-equipment instructions for the job.
Technical Specifications
| Brand / Model | GATLING / GAT12 |
| Working Pressure | 150 Bar / 15 MPa / approximately 2,200 PSI |
| Water Flow Rate | 12 L/min |
| Power Rating | 2.5 kW |
| Motor Speed | 1,450 RPM |
| Power Supply | 220V / 50Hz |
| Dimensions | 1.02 x 0.63 x 0.88 m |
| Gross Weight | 110 kg including package |
13-inch Pressure Washer Attachment
13-inch Stainless Steel Surface Cleaner
A compact rotary surface cleaner for flat concrete, pavers, patios and similar hard surfaces. The 13-inch cleaning path and dual rotating jets help provide even coverage with less overspray than a standard lance.
13-inch Cleaning PathDual Rotating Jets1/4-inch Quick Connect
View 13-inch Surface Cleaner
4,000 PSIMaximum working pressure
13 inCleaning path
149°CMaximum hot-water rating, if applicable
4.0 GPMMaximum allowed flow rate
Suitable For
- Driveways, paths, patios and pool decks.
- Small commercial entrances and outdoor areas.
- Flat surfaces where an even cleaning path is useful.
Selection Checks
- Confirm the pressure washer stays within the attachment pressure and flow limits.
- Check that the 1/4-inch quick-connect fitting matches the hose or lance.
- Test a small area first on timber, painted or weathered surfaces.
16-inch Dual-purpose Attachment
16-inch Surface and Undercarriage Cleaner
Switch between flat-surface cleaning and undercarriage rinsing with the rotating coupler. The four-nozzle design is intended for vehicle, workshop and equipment-cleaning applications where the cleaning angle changes during the job.
Surface and Undercarriage ModesFour Fan-shaped Nozzles1/4-inch Quick Connect
View Dual-purpose Cleaner
4,000 PSIMaximum working pressure
16 inCleaning path
4Fan-shaped spray nozzles
Tri-metalAluminium, brass and stainless steel components
Suitable For
- Vehicle undercarriages and wheel-arch areas.
- Garage floors, parking bays and driveways.
- Cleaning below fixed equipment where a straight lance is difficult to position.
Selection Checks
- Check the washer pressure, flow rate and connector before ordering.
- Use the undercarriage mode where the spray direction is safe for people, wiring and sensitive components.
- Rinse and inspect the nozzles after use.
18-inch Commercial Surface Cleaner
18-inch Stainless Steel Surface Cleaner
The wider stainless-steel surface cleaner is designed for larger hard-surface areas such as warehouse floors, loading areas, parking lots and public concrete. Choose it when cleaning width is more important than compact storage.
18-inch Cleaning PathStainless Steel Housing3/8-inch Quick Connect
View 18-inch Surface Cleaner
4,500 PSIMaximum pressure threshold
18 inCleaning path
6.6 GPMMaximum water-flow capacity
70°CMaximum temperature rating, if applicable
Suitable For
- Large concrete areas, warehouse aisles and loading docks.
- Commercial property maintenance and public hard surfaces.
- Jobs where a wider cleaning path can reduce passes across the surface.
Selection Checks
- Match the washer flow rate and pressure to the attachment limits.
- Confirm the 3/8-inch connection system and hose configuration.
- Use the correct detergent and test an inconspicuous area before full cleaning.
Important: Confirm current pressure, flow, temperature and connector limits on the product page before publishing or ordering. Always follow the pressure washer and attachment manufacturer instructions.
Commercial Backpack Vacuum Buying Guide
Compare filtration, dust collection, floor tools, suction control and daily-use features before choosing a backpack vacuum for commercial cleaning work.
Full-featured commercial vacuum
JB61B Backpack Vacuum Cleaner
The JB61B combines backpack mobility with a multi-stage filtration system, variable suction control, a floor and carpet selector, and a blower function. It is suited to commercial teams working across mixed floor surfaces and areas where carrying a canister vacuum is inconvenient.
HEPA Filtration
Variable Handle Control
Floor / Carpet Selector
Blower Function
View Industrial Vacuum Cleaners
99.97%HEPA filtration at 0.3 μm, if confirmed by product documentation
VariableHandle suction control
DualHEPA bag and shaking cloth bag system
CordedContinuous electric power
Suitable For
Choose the JB61B when operators need hands-free movement and one vacuum for both carpet and hard-floor work.
- Carpet cleaning: use the air-driven turbo brush to loosen embedded dust where the tool is suitable.
- Mixed flooring: switch between hard-floor and carpet settings with the foot pedal.
- Detail cleaning: use the included crevice, dusting and specialist brushes for edges and gaps.
- Restricted-access areas: the backpack format can be useful in stairs, corridors and rooms with limited storage space.
Check Before Buying
- Confirm the HEPA rating, filter replacement method and approved dust-bag type.
- Check the harness adjustment, cable length and operating noise for the intended site.
- For hazardous or fine dust, confirm the required class and workplace controls before use.
Technical Specifications
| Power Supply | Corded electric |
| Filtration System | HEPA pre-motor filter |
| Dust Collection | HEPA bag and shaking cloth bag |
| Suction Regulation | Manual variable control at handle |
| Surface Selector | Two-setting foot pedal switch |
| Accessories | Confirm current included tools on the product page |
Essential commercial vacuum
JB71 Backpack Vacuum Cleaner
The JB71 is a simpler backpack vacuum configuration for routine commercial cleaning. Its dual dust-bag arrangement, stainless-steel elbow and plug anti-detachment lock are intended to support regular maintenance while keeping the setup straightforward.
HEPA Filtration
Dual Dust-bag System
Stainless-steel Elbow
Anti-detachment Plug Lock
Compare Industrial Vacuum Cleaners
99.97%HEPA filtration at 0.3 μm, if confirmed by product documentation
Dual BagA + B collection system
SteelStainless-steel elbow component
LockedPower plug anti-detachment lock
Suitable For
Choose the JB71 when the priority is a straightforward backpack vacuum for frequent commercial cleaning routines.
- Contract cleaning: a practical format for routine floors, stairs, offices and common areas.
- High-frequency use: the plug lock helps reduce accidental power disconnection during operation.
- Regular maintenance: the dual-bag setup provides a clear replacement and emptying workflow.
- Accessories: confirm the current brush, crevice and utility tools included with the product.
Check Before Buying
- Confirm the filter class matches the dust type and workplace requirements.
- Check replacement bag availability and ongoing consumable cost.
- Measure the operator harness and storage requirements before ordering in bulk.
Technical Specifications
| Power Supply | Corded electric |
| Filtration System | Standard HEPA filter |
| Dust Collection | Dual dust-bag system, A + B |
| Connection Tube | Stainless-steel elbow |
| Safety Feature | Power plug anti-detachment lock |
| Accessories | Confirm current included tools on the product page |
JB61B or JB71: Which Backpack Vacuum Should You Choose?
Choose JB61B if you need:
- More control across carpet and hard flooring.
- A blower function and wider accessory use.
- A more flexible setup for mixed commercial sites.
Choose JB71 if you need:
- A simpler routine-cleaning configuration.
- Dual dust-bag collection and straightforward maintenance.
- A practical option for repeated contract-cleaning tasks.
Important: Confirm the current filter rating, included accessories, noise level, dimensions and replacement-bag information on the product page before publishing or ordering. A HEPA label does not by itself confirm an H-Class or M-Class dust certification.
How to Choose a Floor Scrubber Machine
Compare cleaning width, tank capacity, battery runtime, manoeuvrability and recovery performance before choosing a compact or walk-behind floor scrubber.
Compact commercial and residential use
XD12 Portable Floor Scrubber
The XD12 is a compact push-pull floor scrubber for smaller areas, quick spill response and sites where a larger machine is difficult to manoeuvre. Its upright format is suited to retail, hospitality, office and residential hard-floor cleaning.
Upright Push-pull
Small-area Cleaning
Lithium Battery
18 kg Net Weight
View XD12 Floor Scrubber
1,200 m²/hMaximum stated cleaning efficiency
60-75 minStated lithium-battery runtime
18 kgNet weight
5 L / 8 LClean-water / recovery tank
Suitable For
Choose the XD12 when the priority is access and manoeuvrability rather than maximum tank capacity.
- Retail and hospitality: convenience stores, food outlets, small shops and reception areas.
- Offices: compact rooms, corridors, meeting rooms and entrances.
- Residential areas: kitchens, bathrooms, balconies and other hard-floor spaces.
- Restricted access: narrow aisles, elevator lobbies and areas where a larger scrubber cannot fit.
Check Before Buying
- Measure doorways, lifts and storage areas before ordering.
- Confirm runtime against the size of the area and charging arrangement.
- Check the floor type, brush or pad options and recovery-tank emptying process.
Technical Specifications
| Cleaning Width | 430 mm |
| Suction Width | 450 mm |
| Battery Capacity | 15 Ah lithium |
| Operation Mode | Upright manual push-pull |
| Clean / Recovery Tank | 5 L / 8 L |
| Net Weight | 18 kg |
Commercial and industrial use
T2 Walk-behind Scrubber Dryer
The T2 is a walk-behind scrubber dryer for larger commercial areas that need scrubbing and water recovery in the same pass. Its larger tanks and separate brush and suction motors make it suitable for warehouses, supermarkets, schools, facilities and other regular cleaning operations.
Walk-behind System
18 L / 20 L Tanks
24V Battery System
Brush and Suction Motors
View T2 Floor Scrubber
1,500 m²/hMaximum stated cleaning efficiency
18 L / 20 LClean-water / recovery tank
880 WTotal stated motor power
24VBattery system
Suitable For
Choose the T2 when the site needs a wider cleaning workflow and regular water recovery across larger hard-floor areas.
- Commercial facilities: supermarkets, shopping centres, hotels and large entrances.
- Warehouses and plants: logistics areas, production floors and parking facilities.
- Public buildings: schools, healthcare areas and transport facilities, subject to site requirements.
Check Before Buying
- Compare the 330 mm working width with the site layout and required cleaning time.
- Confirm battery type, charge time and replacement-battery availability.
- Check that doorways, ramps, storage and transport arrangements suit a walk-behind machine.
Technical Specifications
| Working Width | 330 mm |
| Squeegee Width | 450 mm |
| Brush Motor | DC 24V / 380W |
| Suction Motor | DC 24V / 500W |
| Battery Options | Lead-acid or lithium, if available for the selected model |
| Net Weight | 40 kg excluding battery |
XD12 or T2: Which Floor Scrubber Should You Choose?
Choose XD12 if you need:
- A compact machine for smaller areas.
- Easy movement through narrow spaces.
- A lighter option for quick cleaning tasks.
Choose T2 if you need:
- Larger clean and recovery tanks.
- A walk-behind workflow for commercial floors.
- Separate brush and suction motors for regular use.
Important: Confirm the current brush, pad, battery, runtime, dimensions and tank specifications on the product page before publishing or ordering. Stated cleaning efficiency depends on floor condition, operator speed and site layout.
Pressure Washer Foam Cannon Buying Guide
Choose a foam cannon by connection type, bottle capacity, adjustment range and the cleaning job. Foam pre-wash can help loosen loose dirt before contact washing when used with a suitable detergent and pressure washer.
Clear-bottle foam cannon
Transparent Bottle Pressure Washer Foam Cannon
The transparent bottle makes it easier to see the remaining detergent mixture during use. With adjustable spray pattern controls and a 1/4-inch quick-connect plug, it is intended for vehicle pre-wash, wheel cleaning and compatible outdoor detergent application.
Transparent 1,000 ml BottleAdjustable Spray PatternBrass and Stainless Components1/4-inch Quick Connect
View Transparent Bottle Foam Cannon
1,000 mlBottle capacity
DualAdjustable spray pattern
BrassCore material component
1/4 inQuick-connect male plug
Suitable For
Choose the transparent bottle if checking detergent level and mixture volume during the wash is important.
- Vehicle pre-wash: apply a suitable foam detergent to cars, trucks and motorcycles before contact washing.
- Wheels and wheel arches: apply compatible cleaning solution to areas with brake dust, grease and road grime.
- Outdoor surfaces: use only detergents and pressure settings suitable for windows, patios, siding or paving.
Check Before Buying
- Confirm the 1/4-inch quick-connect fitting matches your spray gun or lance.
- Check that the pressure washer flow and pressure are compatible with the foam cannon.
- Use detergent at the manufacturer’s recommended dilution and test delicate finishes first.
Technical Specifications
| Spray Pattern | Adjustable vertical and horizontal |
| Core Material | Brass and stainless-steel components |
| Bottle Material | Transparent polymer |
| Tank Volume | 1,000 ml / 0.26 gallon |
| Connection Type | 1/4-inch quick-connect male plug |
| Dimensions | Confirm current dimensions on the product page |
White-bottle foam cannon
Heavy-Duty White Bottle Foam Cannon
The white-bottle foam cannon uses a 1,000 ml impact-resistant polymer bottle with adjustable spray controls and a 1/4-inch quick-connect plug. It is a practical option for regular vehicle pre-wash, fleet cleaning and compatible outdoor cleaning tasks.
1,000 ml BottleWide-mouth FillingAdjustable Spray Pattern1/4-inch Quick Connect
View Heavy-Duty White Foam Cannon
1,000 mlBottle capacity
DualAdjustable spray pattern
BrassCore material component
1/4 inQuick-connect male plug
Suitable For
Choose the white bottle if you prefer a durable bottle format for regular cleaning and detergent application.
- Vehicle pre-wash: apply foam detergent before contact washing cars, trucks and motorcycles.
- Fleet and workshop cleaning: use on compatible equipment, bodywork and hard surfaces with an appropriate detergent.
- Outdoor cleaning: apply compatible detergent to patios, decks and exterior surfaces where manufacturer guidance permits.
Check Before Buying
- Confirm the connection, pressure and flow requirements before ordering.
- Do not use a strong detergent or high pressure on surfaces that may be damaged.
- Rinse the foam cannon with clean water after use to reduce detergent residue.
Technical Specifications
| Spray Pattern | Adjustable vertical and horizontal |
| Core Material | Brass and stainless-steel components |
| Bottle Material | Impact-resistant polymer |
| Tank Volume | 1,000 ml / 0.26 gallon |
| Connection Type | 1/4-inch quick-connect male plug |
| Dimensions | Confirm current dimensions on the product page |
Transparent or White Bottle: Which Foam Cannon Should You Choose?
Choose the transparent bottle if you need:
- Visible detergent level during use.
- Easy monitoring of the detergent mixture.
- A clear bottle format for detailing workflows.
Choose the white bottle if you need:
- An impact-resistant bottle for regular use.
- A wide-mouth bottle for easier filling.
- A simple option for vehicles, fleets and outdoor cleaning.
Important: Confirm the current pressure range, flow range, orifice, connector and bottle specifications on the product page before publishing or ordering. Always follow detergent, vehicle and pressure-washer manufacturer instructions.
Pressure Washer Trigger Gun Buying Guide
Compare working pressure, flow rate, connection type, swivel design and handle size before choosing a trigger gun for vehicle detailing, equipment washing or hard-surface cleaning.
High-pressure professional trigger gun
Premium Short Trigger Gun - 4,350 PSI
This compact trigger gun is specified for up to 4,350 PSI / 300 Bar and 6.6 GPM / 25 L/min. A brass body, ceramic internal valve and 360-degree live swivel make it suitable for compatible high-flow pressure-washing setups where hose movement and close-range control matter.
4,350 PSI / 300 Bar6.6 GPM / 25 L/minCeramic Valve Core360-degree Live Swivel
View Pressure Washer Spray Guns
4,350 PSIMaximum working pressure, 300 Bar
6.6 GPMMaximum flow rate, 25 L/min
CeramicZirconia internal valve core
360°Live swivel inlet
Suitable For
Choose this model when the pressure washer and hose system are rated for its pressure and flow limits.
- Vehicle detailing: use with a compatible foam cannon, lance or nozzle for pre-wash and rinsing.
- Close-range cleaning: the short format can be easier to control around wheels, engine bays and undercarriages.
- Equipment washing: suitable for compatible fleet, workshop and industrial equipment cleaning.
- Outdoor maintenance: use appropriate pressure and detergent settings for patios, driveways, stairs and fences.
Check Before Buying
- Confirm pressure, flow rate and maximum temperature against the pressure washer specifications.
- Check the G3/8 female inlet and 1/4-inch quick-coupler outlet match your hose and accessories.
- Use eye, hand and hearing protection where the equipment and work environment require it.
Technical Specifications
| Body Material | HPb59-1 forged brass |
| Internal Valve Core | Zirconia ceramic |
| Outlet Connection | 1/4-inch quick coupler |
| Inlet Connection | G3/8 female with 360-degree live swivel |
| Maximum Temperature | 60°C / 140°F |
| Dimensions | 360 x 204 x 43 mm |
Commercial and detailing trigger gun
Heavy-duty Short Trigger Gun - 3,625 PSI
The 3,625 PSI short trigger gun is a compact option for detailing, graffiti removal, equipment rinsing and other compatible hard-surface cleaning tasks. Its forged brass body, ceramic valve core and live-swivel inlet are designed for controlled use with a matching pressure washer system.
3,625 PSI6.6 GPM / 25 L/minForged Brass Body1/4-inch Quick Coupler
Compare Spray Guns and Nozzles
3,625 PSIMaximum working pressure
6.6 GPMMaximum flow rate, 25 L/min
BrassHPb59-1 forged body
1/4 inQuick-coupler outlet
Suitable For
Choose this model when a compact handle and a lower pressure rating than the 4,350 PSI model fit the equipment and job.
- Graffiti and hard-surface cleaning: use a suitable nozzle, detergent and surface-safe pressure setting.
- Vehicle detailing: use with a compatible foam cannon for pre-wash and rinsing.
- Tight-space washing: use around engine bays, door jambs, undercarriages and motorcycles where access permits.
- Commercial equipment: suitable for compatible fleet and workshop cleaning tasks.
Check Before Buying
- Confirm the G3/8 inlet, 1/4-inch outlet and live-swivel configuration.
- Do not exceed the lowest pressure, flow or temperature rating in the complete system.
- Inspect seals, couplers and hose condition before each high-pressure use.
Technical Specifications
| Body Material | HPb59-1 forged brass |
| Internal Valve Core | Zirconia ceramic |
| Outlet Connection | 1/4-inch quick coupler |
| Inlet Connection | G3/8 female thread with live swivel |
| Maximum Temperature | 60°C / 140°F |
| Dimensions | 209 x 183 x 34 mm |
4,350 PSI or 3,625 PSI: Which Trigger Gun Should You Choose?
Choose the 4,350 PSI model if you need:
- A higher maximum pressure rating.
- Up to 25 L/min stated flow capacity.
- A longer body for the specified installation.
Choose the 3,625 PSI model if you need:
- A compact 209 mm body.
- A lower maximum pressure rating for a matching system.
- A trigger gun for detailing, graffiti and general equipment rinsing.
Important: Confirm current pressure, flow, connection, seal and temperature specifications on the product page before publishing or ordering. Never exceed the lowest rating of the pressure washer, hose, coupler, trigger gun or nozzle system.