Dry Ice Blaster Compatibility Guide
Ensure your facility meets the strict air compressor and power requirements before purchasing this heavy-duty blasting system.
Procurement Alert: External Equipment Required
This system requires an external industrial air compressor and specialized dry ice pellets to operate. These are NOT included with the machine and must be sourced separately.
Industrial Grade
Extended Reach Dry Ice Blasting System
Air Compressor Setup
Minimum Power: ≥ 7.5 kW (10 HP) compressor with an air tank ≥ 150 gal.
Output Needed: 87–116 PSI (0.6–0.8 MPa) pressure and 71–141 CFM (2–4 m³/min) air flow.
Avoid: Standard residential or underpowered compressors (will fail to propel dry ice).
Dry Ice Consumables
Approved Pellets: Strictly 3 mm or smaller high-density dry ice pellets.
Avoid: Dry ice blocks, nuggets, or any pellets larger than 3 mm.
Note: Using oversized ice will cause hopper jamming, inconsistent feeding, and potential internal damage.
Power & Configuration
Power Supply: 240 V / 50 Hz electrical connection required for the internal motor.
Hose Compatibility: Natively supports and includes both a 13 ft standard hose and a 26 ft extended hose for maximum reach.
Pressure Washer Compatibility Guide
Verify electrical requirements and accessory compatibility to ensure optimal performance for continuous commercial operations.
Procurement Alert: Electrical Requirements
The GAT12 is a heavy-duty commercial machine that requires a stable 220V / 50Hz power supply. Ensure your facility or generator meets the 2.5 kW power rating before procurement.
Commercial & Industrial
GATLING GAT12 Pressure Washer
Power & Water Setup
Power Supply: Requires a dedicated 220V / 50Hz electrical connection (2.5 kW rating).
Water Feed: Requires a continuous municipal or tank water supply capable of sustaining 12 L/min.
Avoid: Undersized extension cords or unstable portable generators.
Approved Accessories
Surface Cleaners: Fully compatible with 13" residential and 18" commercial stainless steel surface cleaners.
Detailing Gear: Optimized for short trigger guns, premium snow foam cannons, and 4-nozzle undercarriage cleaners.
Note: Ensure all connected accessories are rated to handle at least 150 Bar (2,200 PSI) and 12 L/min flow.
Operational Limits
Usage Run-Time: Approved for prolonged, continuous daily workloads (utilizing the 1,450 RPM low-speed motor and reinforced cooling system).
Max Output: Provides a stable continuous output of 150 Bar (2,200 PSI).
Procurement Alert: Fitting Standards
1/4" and 3/8" quick-connects are not directly interchangeable. Adapters must be purchased separately for cross-spec setups. Never use with steam cleaners or low-pressure systems.
Residential
14" Rotary Cleaner
Equipment Specs
Pressure: 2,000 – 4,000 PSI.
Fitting: 1/4" Quick Connect.
Avoid: Exceeding 4,000 PSI (rupture risk).
Operational Limits
Surfaces: Flat horizontal hard surfaces only.
Avoid: Vertical or irregular surfaces.
Max Temp: 300°F (149°C).
Dual-Purpose
16" Surface / Chassis Cleaner
Equipment Specs
Pressure: ≤ 4,000 PSI.
Fitting: 1/4" Quick Connect.
Replacement: OEM fan nozzles only.
Operational Limits
Switching Modes: Must release trigger and stop water flow before rotating the coupler.
Avoid: Mixing angle wands with other brands.
Commercial Grade
18" Stainless Cleaner
Equipment Specs
Pressure: ≤ 4,500 PSI.
Flow Rate: ≤ 6.6 GPM.
Fitting: 3/8" Quick Connect.
Operational Limits
Temp Limit: Max 158°F (70°C). Not for high-temp mode on hot-water washers.
Surfaces: Requires relatively even ground for casters.
Maintenance: Rinse after use in salt or chemical environments.
Vacuum Cleaner Compatibility Guide
Understand consumable requirements, surface limitations, and critical safety boundaries for commercial backpack vacuums.
Procurement Alert: Zero Interchangeability
Filters and dust bags for the JB61B and JB71 models have different dimensions and are NOT interchangeable.
Full-Featured
JB61B Backpack Vacuum
Consumables
Bags: OEM HEPA bags required.
Cloth Bag: Shake-out cloth bag must be washed after standalone use.
Avoid: Reusing old disposable bags.
Surfaces
Approved: Dry hard floors & carpets.
Avoid: Liquids, wet surfaces, hot materials (coals/ash).
Note: Turbo brush requires clean filters for proper RPM.
Strict Limitations
Debris: No construction dust (plaster/sand) or sharp objects.
Safety: No flammable environments.
Pet Brush: Do not use on delicate fabrics or wood floors.
Essential Grade
JB71 Backpack Vacuum
Consumables
System: Dual dust bags (A + B).
Maintenance: Shake out outdoors. Wash HEPA filter monthly (air dry 24 hrs).
Surfaces
Approved: Dry hard floors only.
Avoid: Carpets, wet surfaces, liquids.
Strict Limitations
Debris: No cement ash, wood chips, or sharp items.
Safety: No flammable gases, hot items, or liquids.
Floor Scrubber Compatibility Guide
Ensure you purchase the correct batteries, brushes, and cleaning agents to maximize equipment lifespan and maintain warranty coverage.
Procurement Alert: Zero Interchangeability
Batteries and brushes for the XD12 and T2 models have entirely different specifications and are NOT interchangeable.
Light Commercial
XD12 Portable Scrubber
Hardware & Parts
Battery: OEM 15Ah Lithium only.
Avoid: Non-OEM or 3rd-party batteries.
Brushes: Magnetic discs; replace at 33% bristle wear.
Storage: Remove fully charged, cycle every 2 months at 20°C.
Surfaces
Approved: Smooth indoor hard floors.
Avoid: Carpets, rough cement, and gravel.
Limits: Strictly for indoor use only.
Chemicals & Limits
Approved: pH 4–10 cleaning solutions.
Avoid: Oxidants, chlorine, pure acids, solvents.
Note: Use anti-foam with degreasers. Max fill water 50°C.
Industrial Grade
T2 Walk-Behind Scrubber
Hardware & Parts
System: 24V (Two 12V batteries in series). Supported: WET, AGM, GEL, or 24V Lithium.
Avoid: Mixing brands, batches, or battery types.
Brushes: 13-inch only (PPL, Nylon, Hard, Steel, Dense Stiff).
Surfaces
Approved: Concrete, epoxy, tile, terrazzo.
Avoid: Carpets and explosive environments.
Limits: Do not exceed rated machine slope.
Chemicals & Limits
Approved: Neutral cleaners (pH 5–9).
Avoid: Pure acids (will damage internals).
Note: Low-foam recommended. Max fill water 50°C.
Wash Accessories Compatibility Guide
Verify quick-connect standards, thread sizes, and pressure limits before sourcing trigger guns and foam cannons.
Procurement Alert: Connection Standards
Pay strict attention to inlet and outlet specifications. Our Spray Guns require a G3/8 threaded hose connection, while the outlet and Foam Cannons utilize the industry-standard 1/4" Quick-Connect (QC) system.
High-Pressure Hardware
NeoClean Short Trigger Spray Guns
Connection Specs
Inlet Setup: G3/8 Female Thread (with integrated 360° live swivel on premium models).
Outlet Setup: Standard 1/4" Quick Coupler (QC) for rapid accessory switching.
Avoid: Direct connection to M22 or 3/8" QC hoses without purchasing appropriate adapters.
Operational Limits
Max Pressure: Rated up to 4,350 PSI (300 Bar) / 3,625 PSI depending on model.
Max Flow: Supports up to 25 L/min (6.6 GPM) for high-flow commercial washers.
Temp Limit: Do not exceed 60°C (140°F). Not suitable for high-temp industrial steam setups.
Approved Attachments
Foaming: Perfectly pairs with NeoClean Snow Foam Cannons via the front 1/4" QC.
Nozzles: Accepts any standard 1/4" quick-connect spray tips.
Detailing Gear
NeoClean Snow Foam Cannons
Connection Specs
Interface: Standard 1/4" Quick-Connect Male Plug (QD).
Recommended Pairing: Best used with NeoClean short trigger spray guns for maneuverability.
Avoid: Non-1/4" female couplers (requires adapters).
Hardware & Materials
Core internals: Solid forged brass and stainless steel for chemical corrosion resistance.
Bottle: 1000ml (0.26 Gallon) capacity. Available in shatter-proof transparent or heavy-duty white polymer.
Operation Control
Mixture Dial: Top adjustment knob controls dilution ratio from heavy foam to clean water.
Spray Pattern: Front nozzle adjustable between vertical/horizontal and narrow jet/wide fan.
Note: Always rinse the brass core with clean water after using strong alkaline or acidic detergents to prevent clogging.